Re: [T3] Chrome

["Jim Adney" <jadney@vwtype3.org>]

On 24 Sep 2013 at 6:55, Dennis Stiefel wrote:

> Graves Plating in Florence, Alabama replated all the chrome pieces on my 60
> T1.  They did a good job.  I would not hesitate to use them again.  Here is
> their web address:  
> 
> http://www.gravesplating.com/

> I guess it was you who was telling me about the place in Florence Marion.

Maybe I couldn't see it very well, but your chrome didn't look that 
bad to me, Dennis. To rechrome those bumpers, you'd need to remove 
the rubber strip, and you won't be able to do that without destroying 
it. And those strips are irreplacable.

I found that I was able to get the vast majority of the bumps out of 
my bumpers with the help of a hydraulic press and some carefully made 
wood blocks. A couple shapes of blocks to fit inside and outside, 
around the rubber strip, will do wonders if you're careful and 
willing to work slowly.

You'll want to take the bumper brackets off to do this, but that's 
pretty easy, and that will let you straighten, sandblast, and paint 
the brackets (black) if you haven't already.  

I did mine working by myself, but having a second person to help hold 
things would have made it go a lot faster.

I'll bet you've got one of those presses in your shop.

When I was finished I wirebrushed and painted the insides with alum 
Rustoleum with a brush. The finished product wasn't perfect, but they 
were a terrific improvement over the bent up bumpers I started with. 

A little chrome polish on the outer face will help make any pits 
there seem less obvious. You've probably already done that part.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.